wr250 shock on a WR450?

3 replies to this topic
  • Oldmxer

Posted May 29, 2007 - 07:00 AM


I have an emergency. A buddy is leaving for Colorado and his shouck is leaking on the 2003 WR450.
Does anybody know if a shock from a 2003 WR250 will fit.

It looks the same, but I did not want to pull both if I can get an answer here first.

  • marty b

Posted May 29, 2007 - 01:25 PM


look at the part numbers onlin

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • old man dan

Posted May 29, 2007 - 01:36 PM


If it saves a riding trip I would go for it. I would probably keep the spring from the 450 on the 450 though. The valving might be a little different I doubt it would be much.

  • Oldmxer

Posted May 30, 2007 - 05:28 AM


Shock part numbers are different, BUT the top and Bottom bolts parts numbers were the same. So I went ahead and moved it.
I am sure the valving is just different is why the shock numbers are different.
It did bolt right up, and the bodies look identical.
IE: it worked and the trip will go on as planned.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.