07 WR AIS removal Kit throttle Scew

1 reply to this topic

Posted May 27, 2007 - 01:34 PM


I just removed the throttle stop screw and it was cut off right after the threads ... The one in the kit is about~1/3 " longer (with no threads on the end)... Does any one know if the screw with the Kit is the correct size? Could it be the shop cut it off too short??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Johnny34

Posted May 27, 2007 - 01:41 PM


The older WR models have a stock length of 30mm and the YZ is 23mm. If your stop is shorter than 23mm it is either there is something different about the '07 model or some jacka$$ at the dealership cut it too short. My vote is for the Jacka$$.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.