pics of my xr600 in a cr125


13 replies to this topic
  • gdavis2265

Posted May 17, 2007 - 07:37 PM

#1

thought I'd share my latest conversion. Almost finished!

http://good-times.we...099097893GxHUPN

  • NMike

Posted May 17, 2007 - 07:52 PM

#2

nice work! you must have ALOT of spare time :)

  • XR4DEZ

Posted May 17, 2007 - 08:36 PM

#3

Looks like you have a few nice projects going, looks good. How'd you work out the carb?

  • gdavis2265

Posted May 18, 2007 - 04:46 AM

#4

thanks,

The carb is a 40CV off of a Harley Big-Twin. Made a mainfold out of sheetmetal to attach to the twin intake ports on the head. It had to mount outside the frame because of limited space.

Glenn

  • rdsrf

Posted May 18, 2007 - 10:06 AM

#5

Hmmm. Just a thought....Looks like the carb might get damaged when you take a spill. Might be a good idea to fabricate some protection for it.

  • gdavis2265

Posted May 18, 2007 - 11:48 AM

#6

Yea, I was afraid of that also- might have to put a roll cage on it!

  • davidarnott

Posted May 18, 2007 - 04:34 PM

#7

That is such a cool looking project. Id love to hear and see more about it when you are done. Are you going to dress it up?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • gdavis2265

Posted May 18, 2007 - 05:35 PM

#8

It sounds really mean. That CRF pipe is loud. I just rode it around the block. Starts in 1-2 kicks!

My only real problem is under extreme front fork compression the tire will hit the headers. Looks like I'm going to have to flip the pipe 180° to the other side of the bike. (lots of pipe work. Damn! oh well) I was going to do this originally, but I thought I could make it work stock. All in all, it seems to be a nice running/riding bike. Sure has a bunch of power. It holds about 3.5 quarts, I was hoping the oil system would hold more.

I'll try and snap a few pics tomorow.

Thanks for looking,
Glenn

  • HawkGT

Posted May 18, 2007 - 07:42 PM

#9

I'm envious of your fab skills and knowledge.

  • cbaranski

Posted May 19, 2007 - 10:33 AM

#10

I cant wait to see this one done!!!!!!!

  • kxfreak

Posted May 19, 2007 - 10:38 AM

#11

here's an idea, you might be able to order and offset clamp or fab one up your self if you have acces to a milling machine or cnc, and that way that passes the pipe work, and keeps the front tire from rubbing, just an idea?

  • gdavis2265

Posted May 19, 2007 - 01:35 PM

#12

couple more pics:

http://good-times.we...099097893GzNlCa

  • mgs781

Posted May 19, 2007 - 03:34 PM

#13

Very cool project. How much does it weigh?

MGS

  • gdavis2265

Posted May 19, 2007 - 03:53 PM

#14

255lbs on the 'ole bathroom scale.





Related Content

Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 1 reply
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.