WR 450 and YZ 450 Front Wheel Interchange


2 replies to this topic
  • sheriffwoody

Posted May 16, 2007 - 08:19 PM

#1

I searched for the answer but could only find that they may have changed the WR450 front wheel assembly in 04. But do I understand that we can run a YZ front wheel? If we use the YZ spacers and loose the odo?
If I remember right the 250's have a smaller width?
Thanks in advance:confused: .

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WYSIWYG

Posted May 17, 2007 - 07:52 PM

#2

The front wheels are definitely interchangeable as long as you get YZ spacers (Ride Engineering has some cool anodized ones). Only the rear rim on the 250's is narrower, but it will still bolt right up to a WR or YZ rear end.

-C

  • sheriffwoody

Posted May 19, 2007 - 09:43 PM

#3

So, If I had an 05 WR450, I can use a YZ 250/450 front tire from what years?:)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.