About to Buy a Husqvarna 610sm anything to watch 4


18 replies to this topic
  • orangeback

Posted May 16, 2007 - 02:31 AM

#1

About to buy a Husqvarna 610sm anything to watch 4

--------------------------------------------------------------------------------

looking at buying a sm610 husqvarna Motard, anything to watch out for ??
Ive heard that getting parts can be a long painfull task ?
anything good or bad to watch out for ?
read one horror story on here about them,
Its New with a 2 year warrinty , but thats not worth a cup full of cold piss if it spends half it not going,

its been a big desision to Quit the ZX10R to go down to a motard ,after a long list if big road bike , i thought it was time to slow down , and get quicker through the slower stuff , since im in New Zealand there no sortage of tight twistys.
Thanks

  • gaston2667

Posted May 16, 2007 - 07:49 AM

#2

be very carefull twisting the throttle....it might pull your shoulders out of joint. :0

  • GuzziMoto

Posted May 16, 2007 - 09:21 AM

#3

I'm no expert on Huskys, but from what I hear the 610 makes an excellent street bike and the 510 is a great race bike(less lbs., more maint.)
Have heard they're reliable.I almost bought one. Scared off by lack of dealers around me.

  • Wackyd

Posted May 16, 2007 - 09:39 AM

#4

Hey this is my first post:applause: I pick up my SM610 Friday from a loacal shope here in Salem Oregon,.I'm like a child waiting for Christmas to come,..All my work buddies are getting sick of me yakking about it,.,....When I show up for work come Monday and they ask to take it for a spin,.Il'll make them wait till the break-in is over,..LOL!


Picks to come,.................Dan

  • SuperMotoMike

Posted May 16, 2007 - 10:45 AM

#5

police cars :)

About to buy a Husqvarna 610sm anything to watch 4

--------------------------------------------------------------------------------

looking at buying a sm610 husqvarna Motard, anything to watch out for ??
Ive heard that getting parts can be a long painfull task ?
anything good or bad to watch out for ?
read one horror story on here about them,
Its New with a 2 year warrinty , but thats not worth a cup full of cold piss if it spends half it not going,

its been a big desision to Quit the ZX10R to go down to a motard ,after a long list if big road bike , i thought it was time to slow down , and get quicker through the slower stuff , since im in New Zealand there no sortage of tight twistys.
Thanks



  • Ivor237a

Posted May 16, 2007 - 09:03 PM

#6

I'm up in Portland... when you go down Salem way on Fri would you take a quick invent of the Huskys? As soon as I finish my new garage up here, I just may put a new Husq in it. I like damned near all of them... I'd probably get a TE250 if any were avail, but also like the SMs a HELL of a lot. Not sure of the weight factor on the 610... it looks a lot bigger than the 450/510. Would appreciate your impressions on that point. I'll have to bop on down sometime in the near future.
PS, is there any parking security stuff on any of them? Keys, steering lock, anything?

  • SuperMotoMike

Posted May 17, 2007 - 03:28 AM

#7

610 has a key and a steering lock.

  • sorta_motarded

Posted May 17, 2007 - 03:35 AM

#8

Re: About to Buy a Husqvarna 610sm anything to watch 4
Yes watch for me passing you on my 510 :)

  • orangeback

Posted May 17, 2007 - 11:24 AM

#9

Re: About to Buy a Husqvarna 610sm anything to watch 4
Yes watch for me passing you on my 510 :)


i like a challange
when you coming to NZ

  • Fullspeed

Posted May 18, 2007 - 08:22 AM

#10

I'm from Oregon, too (Portland). I've also got a SM on order, but it's Austrian not Swiss. I love Huskies & once has a 350 dual sport. The 610 looks hot. Lack of dealers in my area made me want to go KTM instead, so I'm waiting for my new 690 to get here. Wackyd & Ivor237a: I'd like to meet up w/ you fellas sometime for a ride & compare notes on the good places around here to get the best use of a Supermoto. I plan to do some light offroading on mine.

  • Wackyd

Posted May 18, 2007 - 09:08 PM

#11

We should get togather,.That woud be fun. I got my Motard today:ride: I love this bike! The only bad thing I can say about the SM610 is the seat,.Hard as a rock,..Heres a You tube vid from today,..



  • Goosedog

Posted May 19, 2007 - 04:41 AM

#12

About to buy a Husqvarna 610sm anything to watch 4


The bikes come way lean so do the jetting mods, new irridium plug and aftermarket pipe. Lots of help at SMJ and Speedzilla.com

  • Fullspeed

Posted May 19, 2007 - 07:30 PM

#13

Congrats, Wackyd. That is one of the finer looking bikes ever made, in my book. Have a fun Sunday & I'll let you know when I receive my KTM 690 Supermoto so we can go make some trouble.

  • llawd

Posted May 27, 2007 - 03:51 PM

#14

Another Oregon SM newbie here. Got my 610 from BMP two weeks ago. Great fun so far! :)

  • llawd

Posted May 27, 2007 - 03:54 PM

#15

About to buy a Husqvarna 610sm anything to watch 4
...since im in New Zealand there no sortage of tight twistys.
Thanks


I think you'll like the SM if you've got lots of tight twistys. Fast and flickable.

  • WRX Boy

Posted May 30, 2007 - 08:59 AM

#16

We should get togather,.That woud be fun. I got my Motard today:ride: I love this bike! The only bad thing I can say about the SM610 is the seat,.Hard as a rock,..Heres a You tube vid from today,..


Great looking bike. I love the pipe. What brand is that? Or is it a stock one with the heat shield removed?

Been debating on trading in my DRZ on the 610, and the one thing that I find ugly about the 610 is that stock pipe. Man is it fugly.

  • Wackyd

Posted May 30, 2007 - 09:10 PM

#17

Great looking bike. I love the pipe. What brand is that? Or is it a stock one with the heat shield removed?

Been debating on trading in my DRZ on the 610, and the one thing that I find ugly about the 610 is that stock pipe. Man is it fugly.


Yes I removed the heat shield and then cut 5" 1/2 in of the stock MUff,.Seems to work fine,.Little more bottom end. Heres a Youtube vid,.



Let me know what ya think of my poor mans mod:ride:

  • redricerocketrider

Posted May 31, 2007 - 07:51 PM

#18

I bought one to replace my DRZsm. 702 miles on the SM610 and while I'm happy with it overall, there has been a few issues. First, it's buzzier than the DRZ (no surprise) and while it definitely has more power, it's not scary powerful.

The seat has to go. After 50 miles...ouch! The Renazco has been ordered!

I'm not crazy about the fit and finish. Coming from mainly Hondas, I'm used to even seams, straight, well fitting panels and exceptional paint. I spent an evening just tightening fasteners and a noticed one is now missing. If Harley Davidson buys Husqvarna, they won't have to change a thing.

So far I've trimmed 7# off the bike by removing the pillion foot pegs (passenger seat...what passenger seat) and the charcoal canister with an inordinate amount of tubing must have fallen off (thank you Ted West).

I'm getting used to having two different chokes though most of the time, neither is required. I checked the speedo with my GPS and it's spot on, aside from an occassional momentary indication so far off, it defies logic. I'll be cruising at 55 mph when the speedo will register 84 or 112...just for a second and then go back to 55

The other, more serious issue is that at 620 miles, the electronics shut down. Found a spent fuse and replaced it, only to have it do it again and again.....when the bars are turned to the right. I finally traced it to the main wiring harness being over stressed at the steering head. The bundle was routed under the top mount for the left radiator and then through the plactic loom on the steering head. This puts undue stress on the harness and a short resulted.

I removed the upper mount bolt, loosened the lower one as well as the upper hose strap and was able to re-route the bundle above the radiator. This relieved the harness but didn't solve the problem until I removed the harness from the plastic loom and used a nylon tie to attach the harness to the top of the closed plastic loom. For the last 80 miles, there have been no issues. But now I carry a wad of 15amp fuses...just in case.

It's due for it's first oil change this weekend. Still, I'm having loads of fun on the bike, I'm getting to know the workings of the bike a little faster than expected and it's a head turner.

Later, -BRU

  • Ivor237a

Posted October 03, 2007 - 07:24 PM

#19

I'm looking at a used TE250 tomorrow, but there is a used SM610 at a good price that I'm interested in too. Probably a much better machine for my needs... it's just hard for me to not love a dirt bike with license plate as I practically grew up racing 125s. Anyway, there's a good chance I'll have a Husq in the garage by tomorrow evening! :-)

PS, Hooking up with some of you PDX guys in the future sounds like a good idea.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.