Scott's stabalizers and applicable exhaust...

4 replies to this topic
  • jclaus98

Posted May 15, 2007 - 06:09 PM


Two questions: A)How does the Scott's sterring stablizers attach to the frame/triple tree/whatever they attach to on an XR600R from somebody who has one and about how much do the cost? B)I'm trying to get a new exhaust for my 93' XR600R and I'm bidding on one on ebay, but I'm not sure if it will work on mine. The item description says the exhaust is for an 83' XR500, and would like4 to know if anyone has any idea if it might fit? It appears to be the same as mine, but the rear mounting point appears to be a little farther back than mine, anybody??? If it helps at all, it is a Supertrapp model #4MDR-3503, thanks in advance guys!

  • nate992v

Posted May 15, 2007 - 07:01 PM


There is a specific mounting set up for the post, or you can get a weld-on one. As far as attaching the stabilizer, the top two bar clamps are replaced with a Scotts unit. For it to work right, the post has to be centered over the steering stem. For a bolt on, you're looking at $450. The weld on is $400. Where are you at in California.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jclaus98

Posted May 15, 2007 - 07:08 PM


Located in good ol' Sacramento, nate992v, where you at?

  • Supplicate

Posted May 16, 2007 - 08:47 AM


Contact Billet Racing Products and get one of their bolt on forward mount stabalizer post. They are a clean install and work pretty damn good.

here is one of their kits:

its $449 including the stabalizer and mounts.


if you are a taller guy, look at their "SUB" mount, I have one on my 650 and have loved it since day one. Raised the bars up to where they were actually comfortable when standing up not to mention the ease of use and not having to worry about your stabalizer being level ontop of the bar clamps.

  • jclaus98

Posted May 16, 2007 - 03:47 PM


Supplicate, thank you very much, that is exactly what I was looking for, a visual representaqtion of how they work, awesome brother. Anybody got anything for the exhaust question??? Anybody???

Related Content


Honda XR650L 2016 by Chris.GVS

Honda XR650L 2016
  • - - - - -
  • 0 reviews

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

Engine Loping/Sputtering by tcaldwell

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  186 replies

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.