Correct Excell rear rim

3 replies to this topic

Posted May 14, 2007 - 02:41 PM


I just laced up a new Excell rear rim on a stock hub. It is a #FES418. It looks like the spokes are bending right at the nipple as if the holes were drilled wrong.

I have seen different part numbers list. Has anybody else seen this. It is to be are "swap" wheel at the BAJA 500 and don't want it to come apart.

  • Triple B

Posted May 15, 2007 - 10:03 AM


Make sure the stamp is on the Left Side of the wheel.

I can't take credit for this see the thread below, I just remembered reading about it some time ago.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted May 16, 2007 - 04:06 PM


Thank You very much! I knew it looked wrong and the part # checked out right. I am real suprised there is not some note on the rim or in the box?

  • Triple B

Posted May 17, 2007 - 09:56 AM


Yea I agree a sticker, arrow, or instruction something. Maybe they used up the sticker budget with the proper care and cleaning instructions label.
After reading to motochris thread I looked on the Excel website and it also said "Stamp on LH side". Luckily I found this info before I laced a set up a set of Excels on my XR, because I know I would have had it the wrong way.....Murphy's Law

Related Content


XR650L super moto wheels by greggkklee

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how

  • 1 reply

2015 XR650L Squeaking noise by Crayjay

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies

Honda XR650L 2016 by Chris.GVS

Honda XR650L 2016
  • - - - - -
  • 0 reviews

93 xr650l Restoration Project by Zigster

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.