I Done This Correctly

2 replies to this topic
  • muddyken

Posted May 11, 2007 - 03:01 PM


i got tired of waiting for my AIS removal kit to arrive from my dealer ( ordered nov 06 ) so tried a diy effort by plugging up the ends with loctite and steel bar thAt fitted snug in the PIPES


does this look to be correct
there is no popping on decal and i have removed all the bits and pieces

cheers guys

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tony1970

Posted May 11, 2007 - 05:58 PM


Order the TT AIS kit from the TT store. May cost you a little for shipping, but a very clean install. Your mod looks like it will work though.

  • dl19

Posted May 11, 2007 - 08:53 PM


I just the cut the rubber air hose above the clip, filled with silicone, same on air box, re-routed the crank breather to the upper inlet, cut the metal air tube just off from the header, bent it flat, brazed it shut. Looks super clean and works perfectly for less then $1.00.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.