Uncorked. Very righteous, but a question.


5 replies to this topic
  • Bibleman

Posted May 04, 2007 - 05:47 PM

#1

Did all the usual Dave's mods with the exception of adding a FMF Q2 (perfect tone and volume!) and a 160 main jet. I'm not getting on it too much since it's only got about 20 miles on now but I'm just wondering about the throttle response. It starts and runs perfect (much better than stock of course) but it just seems that the first quarter throttle (at any rpm) seems a little soft, but after quarter throttle the power really kicks in. Is this the nature of how the bike runs or do you think I should up the pilot jet (55 right now)?

  • rebelventurer

Posted May 04, 2007 - 09:05 PM

#2

The 58 pilot may help a bit, But the constant velocity carburetor takes time to respond due to the fact that it is a vacuum operated slide. I do not think that you will ever get rid of the hesitation completely but with some attention to the jetting and perseverence you can almost eliminate it.
Good luck, at sea level an uncorked L jetting specs that work well for me are 58/165, with daves mods and dynojet adjustable needle and lighter slide spring.

  • Bibleman

Posted May 05, 2007 - 05:30 AM

#3

Thanks for that info. Interesting how you're set up signeificantly different than me and have good results too. I'm going to go check the color of my plug. I think what I'm noticing is just the contour of the throttle cable cam on the carb. I think it opens the carb quicker the farther you turn it.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • xr500_89

Posted May 05, 2007 - 05:03 PM

#4

if you think its a bit soft you might try adding a pumper carb to increase the throttle response

  • Bibleman

Posted May 05, 2007 - 05:21 PM

#5

Why must you encourage me to spend more $$:applause: :p It doesn't take much!:applause:

  • xr500_89

Posted May 05, 2007 - 05:22 PM

#6

well a new carb IMO is the best money spent other than a uncork kit only like 270 for a mikuni pumper





Related Content

Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.