yzf 426 gearbox


3 replies to this topic
  • danny-goddard

Posted May 01, 2007 - 12:16 AM

#1

hi there can anybody tell me if the transmision out of a wr 400 will fit my yzf 426?? if so will it give me longer gears:ride: cheers danny

  • grayracer513

Posted May 01, 2007 - 08:11 AM

#2

Not for certain. The output shaft is the same, as are the main shaft bearings, so as far as the internals go, it should. However, the clutch boss on the 426 is different, and that may mean that the main shaft is machined differently on the clutch end, which could cause the clutch not to fit the WR400 shaft. If that were the case, it might possibly be cured by using a new WR426 main shaft, and if necessary, a WR426 low gear wheel.

But there is no doubt that a WR426 trans will bolt in.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • danny-goddard

Posted May 01, 2007 - 01:15 PM

#3

ok nice one this is the part im looking at (ebay):applause: ( 250109435729)do you think i will need the clutch as well then???

  • grayracer513

Posted May 01, 2007 - 02:09 PM

#4

It isn't that simple. You don't want to use a 400 clutch in a 426, and it may not fit anyway. The primary gears are different. I'd plan on getting more info before I spent my money.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.