Anyone Have A Right Radiator???

9 replies to this topic
  • JORDO 174

Posted April 30, 2007 - 02:17 PM


I need a right radiator for a 01 or 02 yz 426f, i crashed and now it leaks bad...... and the right one is the one with the cap.......make me an offer and thanks, oh and it has to be in good condition and work

  • King_Air

Posted April 30, 2007 - 02:30 PM


Have you tried Mylers? I hear that they can fix most of the damaged ones. I have not had to use them yet.

  • grayracer513

Posted April 30, 2007 - 03:02 PM


Mylers About $80 with a two day turn around, plus shipping time.

  • JORDO 174

Posted April 30, 2007 - 03:19 PM


okay, i will try them, unless someone has one that is cheaper than what they will fix it for

  • CaptainKnobby

Posted April 30, 2007 - 05:16 PM


Mylers About $80 with a two day turn around, plus shipping time.

They didnt charge me that much! I believe they charge the amount depending on what the damage is. I still have the reciept here at the house somewhere. If I remember it was just 40 some dollars and it was my rad with the cap side. They welded the leak I had in it>>>> Another guys handle done mine when we were going around the first turn after the gate dropped. I was on the left side of him and we were both going for the inside when we hit and I got off balance and he fell into me and his handle bar hit my rad and bent one of the channels the water runs through. I tried to straighten it out with a screwdriver and it started leaking. Fount Mylars in back of a dirtrider mag and I sent it to them on a tuesday and had it back on friday>>> They welded it up and I have had no problems with it since. I would recomend them.:applause:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • kyle450rider

Posted May 01, 2007 - 12:35 AM


yah mylers charged me 40 to straighten my right side radiator.Its more if they have to weld and even more if they have to fix the fill neck.I am really impressed with there work.

  • grayracer513

Posted May 01, 2007 - 08:17 AM


Mine was $75, but it was rather badly jacked up. Big twist, and the outer and inner frames were pulled part way off in a couple places. It didn't look new when I got it back, but it didn't look any worse than the old one on the other side that had no damage, either.

  • Wiz636

Posted May 01, 2007 - 10:03 AM


Make a few phone calls to local radiator shops. I had a local guy repair a mangled/leaking radiator off a YZ250 I am rebuilding. $45.00 and it's as good as new.

  • CaptainKnobby

Posted May 01, 2007 - 04:41 PM


Best thing to do is>>>>> If you know where the leak is and know where the hole is also,find someone with a Heli-arc welder also called a tig welder(Tungston inert gas) and get them to weld the hole up. That is what mylers done to mine....... They done a good job fixing the hole but could have done a neeter job welding it. I tig welded for seven years and could have made a prettier weld than they did my first week of welding. But I dont have a tig so I sent it to them..... But hey! they fixed it and its been fine since and I cant complain.

  • ingramo

Posted May 01, 2007 - 06:38 PM


Sent you a PM

Related Content


100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.