Another Rear Wheel Bearing question


2 replies to this topic
  • steve_97060

Posted April 29, 2007 - 09:20 PM

#1

I removed the rear wheel and was checking the bearings, and noticed that the long spacer that rides between the two wheel bearings was loose on the sprocket side, it seems to have about a 1/4 inch of play both horizontally and vertically. The brake side doesn't have much play at all in it, is there supposed to be this much difference in each side, or do I have a problem with the hub/bearings?

thanks for any input...

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted April 29, 2007 - 09:28 PM

#2

It's immaterial. The spacer slides over the axle and is clamped between the bearings to allow the axle to be tightened without loading the bearings along the shaft axis. It cannot move off center once in place, and does not turn, nor does anything turn against it. Unless I completely misunderstand what you're telling me, it's fine.

  • steve_97060

Posted April 29, 2007 - 09:34 PM

#3

It's immaterial. The spacer slides over the axle and is clamped between the bearings to allow the axle to be tightened without loading the bearings along the shaft axis. It cannot move off center once in place, and does not turn, nor does anything turn against it. Unless I completely misunderstand what you're telling me, it's fine.


yeah, it the tube the axle slides thru, I was concerned with the amount of play on the sprocket side versus the other...everything else seems fine...

thanks for the input Gray, can always count on you, even late on sunday nights!!





Related Content

Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.