need to rebuild


No replies to this topic
  • pigriderj

Posted April 21, 2007 - 09:59 AM

#1

This spring I will be rebuilding mr 650 r 2001
I know i need to rebuild the top end because of some compression issues, but since I am already in there I figure I might ad a few extras. Currently it is easy to start and ride, so I want to keep the easy starting aspects of the bike. I was thinking of higher compression pistons 11:1 and a valve job :applause: (larger intake)
I also have stock exhaust but that will be changing next winter.
I am hoping to gain more low to mid range torque with out loosing the top end. Any input would be appreciated.
p.s. I also dont race but I do go to the dunes with it and I love the hill climbs.:excuseme:





Related Content

Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.