Hot Cams stage 1 or stage 2 on xr650r???


8 replies to this topic
  • zrt1

Posted April 20, 2007 - 03:00 PM

#1

Ive got an 01 650r that I use for bombing around on the street, its got a full FMF pipe, and was looking at the Hot Cams. Does anyone have any real world experience with the two (stage 1 vs. stage 2)? Good, bad?? How much bottom end did you lose if any? thanks..

  • hill5150

Posted April 20, 2007 - 04:26 PM

#2

Stage II w/ 680 motor Eddie carb Barnum Exhaust 14-48 gearing Lost a little bottom end, but the bike hauls azz, the minor low end loss is insignificant, I ride dez 5th gear stuff, and it can be dealt w/ gearing...for the small tight stuff.............Get it.......

  • steed2

Posted April 21, 2007 - 04:45 AM

#3

i run a fmf powercore 4 with a stage 2 and honestly i didnt notice any bottom end loss the bike rips now and the improvement is amazing.

  • zrt1

Posted April 21, 2007 - 08:07 AM

#4

Is your bike still a stock bore 650? Will the stage two cam work with the stock compression?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • steed2

Posted April 21, 2007 - 02:15 PM

#5

my bike is stock internals

  • drop

Posted April 21, 2007 - 03:51 PM

#6

Anyone have dyno charts for both?

  • davidarnott

Posted April 21, 2007 - 09:13 PM

#7

I had my mechanic install a Hot Cams stage II cam and edelbrock carburator on an uncorked XR650R with a stock piston and exhaust. They jetted the carb on a dyno and dynoed it before they started. This combination yielded a large increase in torque over the entire RPM range including the bottom end. Horsepower is really up over 5000 RPM it just hauls like crazy. If you are a power freak this cam is for you also it sounds like a million bucks.

  • drop

Posted April 22, 2007 - 07:24 AM

#8

Got any numbers?

  • zrt1

Posted April 23, 2007 - 10:20 AM

#9

So if im jetted fine now, what sort of jetting needs to be done with the stage 2 cam? thanks..





Related Content

Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.