opening up my Wr450


10 replies to this topic
  • old219

Posted April 18, 2007 - 01:41 PM

#1

I purchased a 06' WR450F and was wondering if anyone had any info on unplugging my bike. (Air filter box, gray wire, throttle stop, baffle, etc.) I was also wondering if you needed to rejet after making these mods?

  • JimL

Posted April 18, 2007 - 02:58 PM

#2

just go buy the ais removal kit from yamaha. Best 40 dollars you can spend . It will tell you what you need to know. After that if you have more questions use the search feature for endless supply of info

  • old219

Posted April 18, 2007 - 03:56 PM

#3

Thanks, I appreciate the info.

  • FastRides

Posted April 18, 2007 - 08:11 PM

#4

Suggest you read the sticky's (especially the performance index) - they're cash $$ with loads of info. You'll get a feel for the different directions you can go with your '06 and which is best for you. Good luck

  • old219

Posted April 18, 2007 - 09:06 PM

#5

I am new to this. What is sticky's and where do I find it?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WR450RICKO

Posted April 18, 2007 - 09:11 PM

#6

I am new to this. What is sticky's and where do I find it?

They are the beginning threads in this forum

  • FastRides

Posted April 18, 2007 - 09:13 PM

#7

old219,
Look here:
http://www.thumperta...isplay.php?f=20

LOTS of good reading... if your eyes don't start bleeding! :thumbsup:
Good luck

  • old219

Posted April 19, 2007 - 08:03 AM

#8

Thanks again for the help!

  • Nightwind15

Posted April 19, 2007 - 09:02 AM

#9

They are on backorder indeffinately!!! I am dealer so this is the facts...waiting on one for my own 06!

  • old219

Posted April 19, 2007 - 12:36 PM

#10

One last question. I'm riding this weekend and there is someone I have to beat. The local shop had to order a throttle stop and I won't get it until next week. Does anyone know the amount to shave off the throttle stop to make it a YZ stop? I read it somewhere awhile back, but can,t remember.

  • Heat Pumper

Posted April 19, 2007 - 05:11 PM

#11

18.3mm from base of bolt head to the end i believe is the measurement of the throttle stop




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.