06 Wr450F electrical

No replies to this topic
  • sefto

Posted April 16, 2007 - 01:18 AM


I have a 06 wr450F. I decided I wanted to remove the hi/lo beam, blinker and horn switch assembly. I unplugged the switch from the 6 pin connector behind my headlight, but now it wont kick the bike over with the electric start. The kickstart works fine. The electric start just keeps winding over with a bit of coughing and spluttering but no start. when I plug the switch back in it fires first go on the electric start.

Your help would be appreciated.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.