Radiator Shroud Tip


4 replies to this topic
  • Billahjack

Posted April 12, 2007 - 05:23 PM

#1

Quick tip for the newer owners -

You may want to drill a 1/4" or so hole in the radiator shroud stiffener ribs close to the radiators and then zip tie the shrouds to the top edge of the radiators. It keeps the shrouds from folding out at high speed and keeps everything stiff up there.

Let me know if you need pictures.

  • frankstr

Posted April 12, 2007 - 07:42 PM

#2

Pics, Post some pics..:thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Billahjack

Posted April 13, 2007 - 04:57 AM

#3

You couldn't see them in my Avatar?

  • Agent2

Posted April 13, 2007 - 07:44 AM

#4

Good idea. One other tip (probably a no brainer) is to replace the lower bolts with a phillips head machine screw and washer - only need a screwdriver to remove the shrowds.

  • Billahjack

Posted April 14, 2007 - 09:48 AM

#5

Pictures -
Posted Image
Posted Image





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.