99 WR caliper spacer?
Posted April 05, 2007 - 08:26 AM
Posted April 25, 2007 - 06:55 AM
Posted May 24, 2007 - 12:58 PM
You'll have to figure out what the diameter of the rotor is, or what the bracket you have was made for. So far, I'm aware of 270mm, 280mm, and 320mm kits made for the WR.
There are two types of mounting brackets you can use. One, which replaces the actual caliper bracket that's part of the stock caliper. The other is an adapter bracket that will go in between your stock caliper mount and the fork caliper mount.
I've heard the best solution (from a supermoto standpoint) is to use the EBC Supermoto 320mm disc with the EBC caliper mount from the honda...this will be a 1-piece solution, as opposed to the standard 2pc offered by EBC.
I was under the impression that the front brake disc diameter was the same for the 400 and 426, so the caliper mount will be interchangeable, but still won't help if your stock one doesn't fit the disc that's on there...