Keyed Ignition, Bajadesigns install in place of push button?

2 replies to this topic
  • markturbo

Posted April 05, 2007 - 07:47 AM


I picked up a Bajadesigns keyed ignition to replace the push button ignition. I see the push button has 4 wires on its plug, the keyed ignition only has 2. I was planning on using the factory plug by removing the factory wires and inserting the keyed wires in there place, but I'm not sure which 2 of the four wires in the plug I should be using?

Picture of the ignition...

Posted Image

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MountainMax

Posted April 05, 2007 - 08:05 AM


check the manual to see what 2 wires you need to use, im at work now so i can't check for you.

  • markturbo

Posted April 05, 2007 - 08:21 AM


Ok I think I found it in the online manual. On the plug, it looks like the red wire(+), and the brown wire (-). The Red/black wire and the black wire appear to be for the indicator light on the ignition.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.