J/D jetting kit??


4 replies to this topic
  • flintlock28

Posted April 04, 2007 - 10:06 AM

#1

Running the j/d jetting kit in my 04' 450f. I'm using the blue needle right now for between 47 and 60 degree weather. At what temperature should I switch to the red needle?? I would guess about 70 degrees or higher, but I'm not sure??? Let me know, thanx.:bonk:

  • grayracer513

Posted April 04, 2007 - 10:10 AM

#2

In their kit for the 250F, the blue and red needles were for different altitudes, not temperature ranges. What do the instructions that came with it say? They're normally pretty informative.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 642MX

Posted April 04, 2007 - 11:05 AM

#3

^^^^ The instructions reference altitude and temperature ranges for the 250/426/450 applications.

I use the red needle year round. My bike sputters a little of the bottom end with the blue needle. Same with my wifes 250F, we use the red needle all the time also.

  • Ga450owner

Posted April 04, 2007 - 11:36 AM

#4

At my altitude - 900-1800ft I swap to the red needle at 65 and above.

  • flintlock28

Posted April 04, 2007 - 01:35 PM

#5

The instructions were somewhat ambiguous, since they listed the red needle for High humidity and/or high temperature. So that's why I'm guessing the cutoff may be around 70 or so;not sure. I usually ride from Sea-level, to about 1800 feet above.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.