a silly question - needle position change


2 replies to this topic
  • laborant

Posted April 04, 2007 - 12:57 AM

#1

Hallo,

How can change the needle position as it seems to low now? Bike is XR650R

Should I remove the link arm from the thorttle valve to get to the needle by removing those two small screws or is there an easy way?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • porterdog

Posted April 04, 2007 - 05:47 AM

#2

Yeah, you need to pull the linkage out to get to the top of the slide, and then you can remove those screws to get to the needle height adjustment.

No easy way, but it's not all that hard, either.

  • laborant

Posted April 04, 2007 - 10:15 PM

#3

thanks for the answer:thumbsup:





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.