Jump to content

450 ready to race


Recommended Posts

Thanks guys! Yeah, I sanded the clutch cover and the ignition cover and polished them myself. I have done this to a lot of bikes. It takes like an hour and a half to do when the bike is brand new. I just sand it with a really agressive sand paper to get the paint off, bht I use finer and finer sand paper, then aluminum polish. When I wash the bike I scrub it with an SOS pad and that makes it look pretty good. Every week before a race I hit it with a little aluminum polish and it makes it look like a mirror. It only takes about 30 seconds to clean it up again.

Link to comment
Share on other sites

That's cool if that's your opinion, but try getting a bad start in the 450 pro class and see what you think of hand guards then. After a couple of broken fingers from rocks, I'm sure you wouldn't mind a set. Trust me, I've been there and done that.

Link to comment
Share on other sites

Hand guard, you must be joking!, I ride a lot of HS's, A MX friend wanted to check a race out to see what they were all about, he showed up bare knuckled! ( no guards ), I asked him: where's your barkbusters, he answered with a question, do ya think I'll need them. I looked at another fellow HSer and smiled .......... absolutely!!!!!, he barrowed a pair. After the race I looked at the face of the guards, looked at him........... he didn't say a word, just smiled:bonk:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...