yz426 rad cap


1 reply to this topic
  • mxgene

Posted March 30, 2007 - 04:06 PM

#1

So I have been having an ever so small amount of coolant leak while riding.
I decided to put a Kawasaki 1.8 (vs 1.1) psi cap on to try to prevent boilover.

However, I found the root cause to be the o-ring on the tube that goes into the water pump was worn. When I put on the higher cap, the coolant came right out. So now I know where I have been losing coolant.

My question is this, will it hurt the bike to still use the 1.8 cap instead of using the stock 1.1?:bonk: :naughty:

BTW- I already have new o-rings for both metal pipes and ordered a new tube since mine had quite a bit of buildup on the inside.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted March 30, 2007 - 07:34 PM

#2

http://www.thumperta...890#post4563890





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.