Mx parts that fits xrr


11 replies to this topic
  • hemskesven

Posted March 30, 2007 - 09:46 AM

#1

Hi friends, i wonder if someone has put together a list or something of the parts that fits the xrr 650 from hondas motocrossers?

My friend sells Honda mx bikes but not the offroad bikes so there i much easyer for me to order mx parts.

I have learned that steering bearings and front brake disk fits from the cr5oo, the brake pads from 2 stroke mxers like cr250,
the pegs should fit from an cr 85,
the levers also from 2 stroke mxbikes.

Can any of you fill something in? Is any aftermarket plastic avalible or just oem?
Xr´s is not a bike you se so often in Sweden so there is kind of hard to find aftermarket parts to it.
i´ve just got mine but i like it! :bonk:

  • Billahjack

Posted March 30, 2007 - 02:09 PM

#2

UFO makes plastics for the XR650R. I actually saw some on Amazon.com a little while back. Also check E-bay. Be careful with the UFO rear fender. There are two holes in it about 1/2" large that suck dirt directly off the tire. I patched them up with duct tape.

  • hemskesven

Posted March 31, 2007 - 11:41 AM

#3

Thanks i will check it out.
Any other tips for parts that will fit?
I´ve found out that the steering bearing is exactly the same as the wheel berings on my bike hauling trailer.... don´t tell any of the ktm guys, they already teasing me for the cr 80 pegs :bonk:

  • Jeff@TheQuadShop

Posted April 02, 2007 - 06:44 AM

#4

A 87 CR500 front wheel bolted up to mine by just changing the right seal and removing the washer from behind the left seal.

  • xr500_89

Posted April 02, 2007 - 01:02 PM

#5

well on my bike i used an assload of mx parts to update the look of my xr i used cr500 plaastics from 2000 on the bike front fender bolted right up rear part of it is a little long but it works find rear fender fits too just got to cut off the large tabs towards the seat

  • hemskesven

Posted April 08, 2007 - 03:01 PM

#6

jeff, did you get the speedometer to work whit the cr 500 wheel?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Jeff@TheQuadShop

Posted April 08, 2007 - 05:16 PM

#7

jeff, did you get the speedometer to work whit the cr 500 wheel?

Yep, the cutouts are machined into the hub already for the gear drive. You just have to change the seal.

  • drop

Posted April 08, 2007 - 05:46 PM

#8

well on my bike i used an assload of mx parts to update the look of my xr i used cr500 plaastics from 2000 on the bike front fender bolted right up rear part of it is a little long but it works find rear fender fits too just got to cut off the large tabs towards the seat


You gotta post some pics of that.

  • xr500_89

Posted April 09, 2007 - 02:53 PM

#9

http://www.thumperta...ad.php?t=432047 pics are all in there

  • drop

Posted April 09, 2007 - 04:44 PM

#10

Oh sorry I thought you meant an XRR.

  • xr500_89

Posted April 10, 2007 - 07:42 AM

#11

it is an xrr its an xr600r

  • drop

Posted April 10, 2007 - 04:28 PM

#12

Right. My mistake.





Related Content

Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.