overflow tube on carb pouring out gas help!

4 replies to this topic
  • otea487

Posted March 27, 2007 - 08:14 AM


I have pulled the float bowl off float needle out why does it keep leaking?debris?bad needle?

  • kskyles

Posted March 27, 2007 - 10:13 AM


try cleaning out the bowl again. any small debris in there might make the float stick.

then check your needle valve to make sure its seating properly. it may be a little worn and need replacement.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mkporn

Posted March 27, 2007 - 02:34 PM


make sure the float height is correct...

  • otea487

Posted March 27, 2007 - 10:12 PM


not exactly sure how to get proper float height any advice "MKPORN" would be greatly appreciated.

  • otea487

Posted March 27, 2007 - 10:16 PM


mornin "HOSS" lot of great info i see! 03/28/07 0015 hrs:ride:


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.