Help wth my 2006 650R rear fender.

9 replies to this topic
  • tswinscoe

Posted March 25, 2007 - 09:30 PM


Hello all
I have cracked my stock rear fender and want to replace it with a rear fender that looks more aggressive, such as the rear fender on the Honda 450. Has anybody had any luck finding anything that will work or done anything like this?. I've searched everywhere I can think and no luck. I do have the street kit on it if that makes a difference. As always appreciate any help!

  • morewoops

Posted March 26, 2007 - 07:40 AM


I've never seen it, probably do to the stock fender is sort of molded around the air box and the sub frame. Not that it can't be done somehow, but be careful with the airbox, the tire swings right by it.

I know a front fender off a 450 wont work, it is too wide and pinches the boots when fully collapsed.

  • XRR-kat

Posted March 26, 2007 - 11:23 AM


Bruce Borynack did a CRF450 (?) to XRR graft.
Check his web pages.
Basically a cut and splice.

  • focallength

Posted March 26, 2007 - 03:03 PM


My rear fender (96 xr600) is just held on by two bolts. Its not molded to an airbox or anything, you can pretty much make anything work, it may not look good but you can make it fit if you really want to.

  • porterdog

Posted March 27, 2007 - 06:10 AM


SMJ to the rescue!


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • XRR-kat

Posted March 27, 2007 - 09:05 AM


That's what Bruce did....
with a CR250 fender back in 04.

  • Greg Greene

Posted October 19, 2007 - 11:43 AM


can someone send me a workable link to Bruce's webpage? thanks

  • porterdog

Posted October 19, 2007 - 01:10 PM


They're down; he had some server issue and it got nuked.

Try a PM instead...

  • BWB63

Posted October 19, 2007 - 02:21 PM


It is a 1996~2002 CR250r FENDER THAT FITS BEST. I am having so much trouble I think I am going to use a different address for the site and try that tonight.

Well anyways the two fenders are grafted together and works out real well in the end. I did not like the idea a first because I thought it would just snap off in a crash. Well, it was a fix for a brock fender from after a major, go to the hospital crash and after the fix I have had two more of the major go to the hospital crashes and the new rear fender setup helded up much better then the stock one. Might be because it's not as close to the ground and so close to the tire?

Posted Image

Posted Image

  • Greg Greene

Posted October 22, 2007 - 05:02 AM


thanks for the reply Bruce, and let us know when your website is back up...



Related Content


Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  159 replies

ignitech programmable XR650L CDI by brianhare

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies

Engine Loping/Sputtering by tcaldwell

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.