04 subframe

1 reply to this topic
  • Toyuki

Posted March 19, 2007 - 10:23 AM


my 04 wr lower right side subframe mount, has some play in it. you can push down on the seat and see it move! the bolt was worn, I replace it and torqued it down, but it still had play! the hole on my subframe must be elongated. if I drill it out and put a steel bushing in it would it hold up? and what would cause this?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Indy_WR450

Posted March 19, 2007 - 06:28 PM


Buy the steel wr426 sub frame. I am on my 2nd aluminum sub frame because the holes do elongate. You can try and have it rewelded and drilled. There is not enough meat for a larger hole and bushing.:applause:


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.