88 XR600R BigBore 41MM Mikuni Jetting

No replies to this topic
  • chrisroug

Posted March 15, 2007 - 07:27 AM


Hey guys, Just got my thumper running again with a big bore from XRs Only (100MM)

I also swapped out the factory Kehin Carb with a 41MM Mikuni from XRs Only. They supposedly jetted it for my elevation. The bike runs GREAT, it is like a totally new ride with that carb. The thing is, when its cold it is a PAIN to start. :applause: With the old carb, it would fire right up. Now with the new carb, when it is warm it starts fine. I just cant determine if she needs more/less fuel with jetting. I have tried messing with the Idle Air Mixture with no luck.

I will confirm later what jets are in it, but i think right now its got a 17.5 Pilot, and a 150-60 Main. I will confirm later. Any info appreciated.


Related Content


Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

What was your path to Beta? by officialhopsof

Dirt Bike   Make / Model Specific   Beta
  • Hot  79 replies

Which thumper motor for a street tracker? by woz

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • * * * * -
  • Hot  29 replies

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker

Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.