cant Get 06 450 to run right


6 replies to this topic
  • nillbag

Posted March 12, 2007 - 01:39 PM

#1

anybody out there have any advice for me on a jetting problem I have an 06 yz 450 and my fuel screw kept falling out Because I had to back it out so far so I changed My main jet to a 170 and my pilot jet from a #42 to a #45 It had helped it stop popping and it runs a bit better the only problem I am having is It has a very slight hesitation right when I hit the throttle it almost bogs for a second before it hits I am also running a FMF factory 4.1 exhaust sys. any advice would be greatly appreciated.

  • CaptainKnobby

Posted March 12, 2007 - 01:55 PM

#2

Mine done the same thing when i put on a DRD full exaust then I pt in a #48 pilot and left #165 main in it and the put the the jet needle in the #5 clip position and it runs good now the fuel screw is at 2and1/4 turns out.

  • StPeters21

Posted March 12, 2007 - 05:21 PM

#3

I'm running a 50 pilot jet/ 168 main/ NFLR needle. I have WB pro exhaust on a 06. I think Pro Circuit recomended a 48.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yamahacrazy_310

Posted March 13, 2007 - 08:22 AM

#4

I got the 4.1 on my 06 and my jetting is 170 main 48 piolet and it runs fine.

  • live4speed

Posted March 13, 2007 - 09:49 AM

#5

try going to the 48 pilot...i run a 170/48 in mine and its a hammer! i think my fuel screw is about 2 turns out.. maybe 2 1/2...

  • yami racer

Posted March 13, 2007 - 09:59 AM

#6

I am running 48 pilot and 165 main in CT at sea level. Will go to 45 pilot in spring (wow soon) No hesitation. Also remember if this is your first four stroke you will need to learn how to roll the throttle rather than snap it open

  • racegmc

Posted March 13, 2007 - 06:41 PM

#7

I am running the fmf jet kit in my 06 450f and it screams. I also have the 4.1 and uni filter





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.