Zip Ty Fuel Mixture Screw

5 replies to this topic
  • maracas

Posted March 11, 2007 - 09:34 AM


need help

i have a WR450 2006

And i made a mistake to order the FMS02 instead of the FMS01

my question to the experts are if definitively the FMS02 will NOT fit?

ir it can fit? if so , how i need to install it, thanks!!!

  • maracas

Posted March 11, 2007 - 05:03 PM




  • woodsk

Posted March 11, 2007 - 06:46 PM


it will not fit they are a different length. if you are going to return it, I would look at getting a T-handle fuel screw. The T-handle is much easier to turn when you are sitting out on a cold day and you have mud all over the carb. at least IMHO

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • un450azul

Posted March 11, 2007 - 06:50 PM


Didn't know there was more that one screw for that FCR carb.. ???

Do know that the Ty Davis fell out after about a year... of course the o-ring probably fell apart.


  • woodsk

Posted March 12, 2007 - 05:32 AM


couple links to T-handle fuel screw



  • John221ex

Posted March 12, 2007 - 12:47 PM


Let me know if you can't take it back and want to trade. I mistakenly got the shorter one for my 400! I didn' t know there were two, either!



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.