total amount of oil


12 replies to this topic
  • moontana

Posted March 10, 2007 - 08:49 PM

#1

In a 06 yz450f what is the total amount of oil you put in when you change the oil and oil filter? and the total for just changing it. Answer in quart and ounces not "l or ml:confused:

  • grayracer513

Posted March 10, 2007 - 09:58 PM

#2

That's on page 2-2 of your manual.

  • moontana

Posted March 10, 2007 - 10:14 PM

#3

Yea it says 1.27 us qt with oil filter change is the .27 about 4 ounces

  • trob

Posted March 10, 2007 - 10:25 PM

#4

i just put 1.2 liters in mine with a new filter. 1.3 quarts

  • moontana

Posted March 10, 2007 - 10:41 PM

#5

when u say 1.3 do u mean or I know what the 1 means,1 quart but the .3 is that 3 ounces?

  • trob

Posted March 10, 2007 - 10:48 PM

#6

your oil should have a number going from 1-1000 on the side so put 1,200 of oil...in the bike 1 1/4 of a quart of oil

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • moontana

Posted March 10, 2007 - 11:09 PM

#7

ok! thanks for the advice!

  • flintlock28

Posted March 11, 2007 - 05:52 AM

#8

1 Quart = 32 ounces

.27 x 32 ounces = 8.64 ounces

32 ounces + 8.64 ounces = 40.64 ounces total

  • motox100

Posted March 11, 2007 - 08:32 AM

#9

Are the 06 & the 07 different?

My 07 manual specifies 1.0 liter (1.06 qt) with oil filter change.

  • kyle450rider

Posted March 11, 2007 - 09:40 AM

#10

Are the 06 & the 07 different?

My 07 manual specifies 1.0 liter (1.06 qt) with oil filter change.


I have 07 and with a filter and oil change i only put in 1 quart and its right on the line on the dipstick.I must not be getting all the old oil out?Anybody clear this up for me?

  • motox100

Posted March 11, 2007 - 09:55 AM

#11

I have 07 and with a filter and oil change i only put in 1 quart and its right on the line on the dipstick.I must not be getting all the old oil out?Anybody clear this up for me?


You're fine, I was refering to the comments about using 1.25 quarts. Seemed like a lot.

  • moontana

Posted March 11, 2007 - 09:59 AM

#12

No, you are probably getting all the oil out. You are probably just not putting enough back in because the oil on the dipstick should be at the top line. Anything below the line you should add oil. If over line A, you should take some oil out via checkbolt.

  • trob

Posted March 11, 2007 - 01:55 PM

#13

tilt the bike but it should all come out........what he said^^^^





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.