Electrical failure


1 reply to this topic
  • tvrjohn

Posted March 06, 2007 - 04:12 PM

#1

Starter clutch retaining screws have sheared off, and damaged the stator windings.
When this happens, does it fry the reg/rectifier or spark plug cap coil unit ?

As cannot get a spark at the plug, after replacing stator !

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • new2blu

Posted March 06, 2007 - 06:45 PM

#2

First you may want to try a new plug I have seen carbon short the insulator before. If that no fix then---Possibly an incorrectly wound stator??? Look in your manual on and take an electrical reading(resistance) of the stator--yamaha calls the stator an "AC magneto". Also check the pick-up coil resistance and the ignition coil resistance. Let us know what the fix is.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.