Master Cylinder Rebuild

1 reply to this topic
  • RD73

Posted March 03, 2007 - 07:56 AM


I bought a master cylinder rebuild kit (manufactured by Moose) and plan on installing it soon on my 2001 YZ 426. Once I get the master cylinder apart, will installation be obvious?

Any tips from those that have done it?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • flintlock28

Posted March 03, 2007 - 05:07 PM


I did mine for a 04' yz450f....was pretty straight forward/easy.

Just make sure you have snap ring pliers, and make sure you put the replacement rubber grommets on the same direction as the stock ones.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.