Jump to content

Chocolate milk for oil?


Recommended Posts

Hello! Ive been riding in some cold conditions here in Norway lately, -20 degrees celsius. As I changed the oil it came out looking like chocolate milk.. Not good! It doesent look like its a lot of water in it, but still. So I was wondering if anyone else had experienced this problem. As far as I can see, the colant level is constant. So if its not possible that water vapor through the breathinghose can cause this, I guess i have a problem with one or more gaskets..

Link to comment
Share on other sites

It had been rebuild, and i guess it has about 30 hours on it. The oil was great during Christmas, but the two latest changes gave chocolate milk.

Ridingconditions in january and february have been -10 - -20 degrees C and a lot of short rides(school, friends and work) so i guess its good conditions for waterwapour to get inn through the breatherhose.

Yesterday i changed the oil again. And I ran the breather hose into he air filter so the carb will get air also from the breather hose. This had been done from the factory on my other bikes.

And also.. since its a lot of stop and go driving in traffic I guess I`m using a lot of clutch..

Going to check up on my oil during this week and let u know what i find out!

Link to comment
Share on other sites

  • 3 weeks later...
it's cause by condensation, your riding in extreme cold and when you shut down the motor water condensation is forming, it is particually bad when you are only doing short rides.

Change your oil more often.

x2. Go for a couple of long rides and it may even clear up. Short trips at -20 C is going to produce condensation and the conditions you describe.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...