THROTTLE STOP MOD???????????



3 replies to this topic
  • DANSOCAL

Posted January 18, 2002 - 06:11 PM

#1

HOW DO I PULL OF THE THROTTLE STOP MOD.(IN DEPTH INSTRUCTIONS)???? HOW MUCH TO GRIND??? WHAT ELSE SHOULD BE DONE TO A 02 WR426?????

  • Easyrider

Posted January 18, 2002 - 06:37 PM

#2

Pull the screw on the Rt side, back of the carb that is colored a dark gray/black. When you pull it, it will have a long section that is not threaded. This is the stop. Cut the non-thread section off, or just take the screw and matchit up with a similar screw (same thread), and put the new shorter screw in there.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WRFUN

Posted January 19, 2002 - 03:49 AM

#3

Dan,

Just go get the throttle stop for the YZ and be done with it. Then you will not have to worry about cutting off to much.

Pete

  • wayneoXCF

Posted January 19, 2002 - 05:33 AM

#4

The screw should be 23mm long, total.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.