Smog Removal on 05 WR450

2 replies to this topic
  • MBrider426

Posted February 18, 2007 - 10:25 PM


I have recently bought a used 05 WR 450 and the previous owner had taken off the smog pump. I have heard the smog pump cuts down on power so i want to leave it off but I am having problems with loosing the rubber caps he had put on the openings left from the smog pump. I was wondering if there was a good way to cap these openings so I don't have to fix them every couple of rides. As of now I have them capped with some rubber caps held on with wire much like is done on hand grips. What works best??? :applause:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WGP

Posted February 19, 2007 - 09:11 AM


Buy the AIS kit....

AIS=Smog Pump

  • kskyles

Posted February 19, 2007 - 02:40 PM


you could probably use some RTV silicone to glue those things on, or you could always replace the caps you have with the TT AIS removal kit.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.