Will the lighting equipment of the YFZ450 quad fit on the YZ450f motor??


1 reply to this topic
  • x2468

Posted February 10, 2007 - 05:52 PM

#1

Just curious, would the lighting equipement of the 450 quad (coil, distributor etc) work on the bike motor? in theory they are the same motor more or less right???

if not, how much do aftermarket lighting kits run?? (for trail and street legalization purpouses)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted February 10, 2007 - 07:27 PM

#2

No. The Quads to date use the basic same ignition case, etc., as the '03-'06 WR450, which has different crankcase than the YZ450. No part of it will fit any YZ450, regardless of year. The only cover, stator, or flywheel that will fit an '03-'05 YZ450 is the one made for it. The '06/'07 YZ450 appears to be able to accept the ignition cover and stator from an '07 WR450, but the left crank axle is different, and a WR crank may be required to use the WR flywheel.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.