06 clutch


4 replies to this topic
  • kylwk1500

Posted February 02, 2007 - 02:50 PM

#1

I am planning on putting in a new clutch kit soon.
just looking for some suggestions on prep and instalation of the plates.

  • tonto256

Posted February 02, 2007 - 02:57 PM

#2

GYTR kit for about $110. Spread some oil on the fibers before you install them and put the machined side of the steel plate facing out from the motor. If you have a Hinson basket and inner hub, don't run the inner anti-chatter ring.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted February 02, 2007 - 07:59 PM

#3

GYTR kit for about $110. ... If you have a Hinson basket and inner hub, don't run the inner anti-chatter ring.

Why do you say that?

  • tonto256

Posted February 03, 2007 - 08:17 AM

#4

When I installed my Hinson unit there was a note about not using that part. I called them and they said it is not necessary to use the inner spring (which is an anti-chatter spring) because their basket/inner hubs don't have a chatter problem. Call Hinson and they can give you more info. GYTR plates and Hinson components is as good as it gets.

  • TeamScream

Posted February 05, 2007 - 09:00 AM

#5

GYTR kit for about $110. Spread some oil on the fibers before you install them and put the machined side of the steel plate facing out from the motor. If you have a Hinson basket and inner hub, don't run the inner anti-chatter ring.


Also if you don't run that anti chatter ring, get yourself one more friction plate to replace the little thin friction plate.
The thin friction plate is designed to be used with the anti chatter ring but if you toss that ring out, then you can run a full size plate as the very first plate you install.
Look closely at the plates and you will see what I mean.





Related Content

Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.