Gap between speed sensor and fork on '06 WR450


No replies to this topic
  • Meltz

Posted February 02, 2007 - 02:15 PM

#1

I just put new tires on my bike for the first time. I've never had a speed sensor to deal with. I think I got it on correctly (lined up the 2 grooves on the sensor with the corresponding parts on the rim). I noticed that there's a few millimeters between the black sensor and the right fork. Is this normal? Judging by the grease that was on both the fork and the sensor when I took the wheel off, it appeared that they actually touched each other when they were originally installed. If anyone has pics of their front wheel installed (a straight-on, front view), that would also be appreciated.
Thanks!




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.