Starter spinning backwards

2 replies to this topic
  • onelugnut

Posted January 25, 2007 - 06:16 PM


I had to replace the left side cover.While it was of I took off the starter and took it apart to inspect it.After I put it all back together it looks like it is sinning backwards:cry: What have I done.:ride:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted January 25, 2007 - 06:28 PM


Did you by any chance rotate the center section of the starter (the part with the magnets) in relation to the end cap with the brushes? The magnets need to be oriented correctly or it will turn backwards. If so try rotating the center section 180 degrees.

  • onelugnut

Posted January 25, 2007 - 06:31 PM


Thats got to be it.Thats BPDBLUE


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.