to many vent lines........


1 reply to this topic
  • qkenuf4u

Posted January 17, 2007 - 05:22 AM

#1

im setting up my catch cans for my supermoto and was wondering why yamaha put two lines on the same vent on each side of the carb ???
one vent hole = two hoses :lol: i blocked off one on each side so that i only have 3 vent lines running to my catch can. anyone see any problems with that ??? :confused:
thanks
lance

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • FFRacing79

Posted January 17, 2007 - 06:28 AM

#2

One is a vent and the other is an overflow. If you want fewer lines, connect the 2 vents(the lines that run up and over the top) with a "T" and the same for the overflow(the lines that come out horizontilly). The carb below doesn't have as many lines but you get the idea. Ideally, it should be mounted below the float level, but I have not had any problems with where it is at. JMO Tdub

Posted Image





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.