Need advice for exhaust!


31 replies to this topic
  • christoswr

Posted January 15, 2007 - 04:26 PM

#1

Hi,
i own a 2003 YZ450F and i'm planning on buying a slip on. There are 4 that i like and are close to my budget so i need some advise to decide.:lol:
1) Yoshimura TRC
2) Pro circuit T-4
3) FMF Titanium Powercore
4) FMF Speed

Which one do you think is going to give more power to my bike and on what range?Also do you know which one is lighter? Generally any info on these slip-ons would be appreciated!!

  • Mighty_Whitey

Posted January 15, 2007 - 05:01 PM

#2

Here's my opinion and yes, I am a little biased. :confused:

The 03' was the red headed step child of the 450 motors. It has the biggest hit and IMHO was the hardest to ride...but it has tremendous power too.

Dubach's pipe really spread the power out and made it more manageable.

So, I vote for Dr.D Exhaust.

My 450 cents worth.

:lol:

  • grayracer513

Posted January 15, 2007 - 07:00 PM

#3

I agree with your assessment of the '03's character, although the '06 actually makes more power (49.7 vs. 47). Dyno charts show the greatest gains over the widest range (not the most peak) with a full FMF system with the Power bomb. The thing I like the most about mine is that it took out the blip in the power curve at 8000 that makes them even harder to ride. Dr. D systems give big low end and mid range at some expense to the top end on an '03, but it's a good choice on that bike.

But the question is about slip-ons, and frankly, I don't have an opinion on them except that one should be looking for the widest power curve and the lowest sound levels in combination.

  • christoswr

Posted January 16, 2007 - 06:01 AM

#4

Thanks guys for the reply's.
Anyone with info about these slip-ons i mentioned?

  • christoswr

Posted January 16, 2007 - 03:27 PM

#5

Anyone?????

  • bigbluerider4life

Posted January 16, 2007 - 03:39 PM

#6

FMF Ti powercore, whats going on my 07 250f

99db or under
sparky
great gains throughout
good price

its fmf, whats not to like...just get any fmf pipe and you wont be dissapointed

dr.d is something to consider also...if gray reccomends something then its good but im stickin with fmf till I die

  • christoswr

Posted January 17, 2007 - 09:20 AM

#7

come on you guys!!139 viewers and no one uses one of the slip-ons mentioned???:lol:
Any info would be apreciated!

  • bigbluerider4life

Posted January 17, 2007 - 05:33 PM

#8

come on you guys!!139 viewers and no one uses one of the slip-ons mentioned???:lol:
Any info would be apreciated!


told you to get either fmf you mentioned...id go with the ti powercore

any of them you mentioned will work great...the big companys don't become big by making crappy pipes do they?
just pick your favorite

  • christoswr

Posted January 18, 2007 - 07:33 AM

#9

told you to get either fmf you mentioned...id go with the ti powercore

any of them you mentioned will work great...the big companys don't become big by making crappy pipes do they?
just pick your favorite



I was thinking for the Powercore but i read that they are not very tough and dent easily!!!:lol:

  • christoswr

Posted January 19, 2007 - 08:47 AM

#10

Is anyone using a WB E series(not the E2)?
I might get a very good deal on this slip on but i dont know much about it!

Check it out
http://www.motoxoutl...PROD&ProdID=772

Its shown on an ATV

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • christoswr

Posted February 12, 2007 - 05:13 AM

#11

Is anyone using a WB E series(not the E2)?
I might get a very good deal on this slip on but i dont know much about it!

Check it out
http://www.motoxoutl...PROD&ProdID=772

Its shown on an ATV


Anyone with any info on the wb e-series??

  • Ranger18

Posted February 12, 2007 - 11:17 AM

#12

Anyone with any info on the wb e-series??


I had one on a CRF450 and I wasn't overly impressed with it. Take a look at www.mrd-racing.com You can pick up a slip on for cheap from there, and they have a great warranty.

  • TMAC25

Posted March 20, 2007 - 01:48 AM

#13

I had a white brothers carbon pro on mine and absolutely loved that pipe, got an 06 yz450f put pro circuit t4 on hate it, going back to white brothers.

  • reggie426

Posted March 20, 2007 - 05:27 AM

#14

Got a FMF Factory 4.1 Ti slip on - loving it, much better

  • motopastor

Posted March 20, 2007 - 11:08 AM

#15

I put an full PC system on my 04 & it turned in into a tractor! I LOVED it! Don't know how a slip on PC will do though???
Hope this helps,
Monty #316
www.cfcnampa.org

  • motopastor

Posted March 20, 2007 - 11:10 AM

#16

I had a white brothers carbon pro on mine and absolutely loved that pipe, got an 06 yz450f put pro circuit t4 on hate it, going back to white brothers.


Hey TMAC25,
I have an 07 450 & have ordered a PC system for it...what didn't you like about the PC on your 06?
Thanks,
Monty #316
www.cfcnampa.org

  • TMAC25

Posted March 20, 2007 - 04:05 PM

#17

I just don't think it really added anything, It is virtually the exact same power as stock and in my opinion it doesn't even look good. But im about to buy the header and see if that makes a difference. I just noticed a huge difference with the white brothers on my 03 and didn't notice much difference with the pc on my 06. Just my opinion.

  • buzzgrizz

Posted March 20, 2007 - 04:24 PM

#18

Here's my opinion and yes, I am a little biased. :eek:

The 03' was the red headed step child of the 450 motors. It has the biggest hit and IMHO was the hardest to ride...but it has tremendous power too.

Dubach's pipe really spread the power out and made it more manageable.

So, I vote for Dr.D Exhaust.

My 450 cents worth.

:applause:


+1 go with the dr.d

  • ncmountainman

Posted March 20, 2007 - 04:37 PM

#19

i run the ti powercore which replaced my old powercore 4,the difference was a quieter more controlled power without any power loss, maybe even a little gain on the bottom. i did run both these with the powerbomb and i highly reccomend you spend the extra for it. as far as denting i've wrecked several times since the ti can was new and its no worse for wear,the muffler is much shorter and is just about covered by the # panel.

  • GiantRobot

Posted March 20, 2007 - 08:45 PM

#20

Very happy with my Dr. D on my 03. Also got the extra slip on baffle for areas I need to quite the beast down.





Related Content

Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.