Info: WR450 07 Reg Plate hanger


22 replies to this topic
  • dangermouse007

Posted January 05, 2007 - 02:07 PM

#1

Ok guys.. how are you hanging your number plates:-

I have seen this on the Yammy Oz site:-

http://www.yamaha-mo...x.htm?motor.asp... check on the WR450 icon look like Yammy mark a hanger

anybody got a part number etc etc etc...

  • Humunn

Posted January 05, 2007 - 02:27 PM

#2

Ok guys.. how are you hanging your number plates:-

I have seen this on the Yammy Oz site:-

http://www.yamaha-mo...x.htm?motor.asp... check on the WR450 icon look like Yammy mark a hanger

anybody got a part number etc etc etc...


I assume you are referring to the license plate bracket for the 07. I've been looking for one myself and have run into dead ends so far. I'm considering making my own. Is it possible to order from Yamaha Australia if you don't live there????

  • gregwr450f

Posted January 05, 2007 - 02:32 PM

#3

contact one of the aussie members and get them to post it over to you.

Here what I did using a bit of old heater hose from a car....
Posted Image

  • Bent6

Posted January 05, 2007 - 03:08 PM

#4

Ok guys.. how are you hanging your number plates:-

I have seen this on the Yammy Oz site:-

http://www.yamaha-mo...x.htm?motor.asp... check on the WR450 icon look like Yammy mark a hanger

anybody got a part number etc etc etc...


That rear flap/plate holder looks nice. Does it have integrated turn signals? Put me on the list of people who want better pictures and a part #. Hope it's available here in the US. I'd like to see better pictures of the whole bike to see if aything else would workout on US bikes.

  • Humunn

Posted January 05, 2007 - 05:29 PM

#5

That rear flap/plate holder looks nice. Does it have integrated turn signals? Put me on the list of people who want better pictures and a part #. Hope it's available here in the US. I'd like to see better pictures of the whole bike to see if aything else would workout on US bikes.


A plate holder with integrated turn signals would be ideal. Exactly what I'm looking for.

  • Humunn

Posted January 05, 2007 - 05:30 PM

#6

contact one of the aussie members and get them to post it over to you.

Here what I did using a bit of old heater hose from a car....
Posted Image


That is very creative. I may do something like you did if I can find a manufactured solution. Thanks.

  • Bent6

Posted January 05, 2007 - 06:18 PM

#7

A plate holder with integrated turn signals would be ideal. Exactly what I'm looking for.


I have an Acceribis one. It is built for a flat MX style fender. It looks ok, but the brake light is oval and so are the turn signals. I really want a smaller rectangular LED taillight. The Australian WR one looks like it would be perfect. I searched google.com.au and could not come up with much. Here is an 05 with factory turns. http://www.eatmydirt...au/articles/735

  • beasly

Posted January 05, 2007 - 07:26 PM

#8

Trick Dualsport have already shipped a few 07 WR kits. Their webpage hasn't been updated but I have emailed them.

  • dangermouse007

Posted January 06, 2007 - 01:16 AM

#9

But as this is on the Yamaha oz site there must be a Yamaha Part Number for the rear Plate holder ????

  • dangermouse007

Posted January 06, 2007 - 01:34 AM

#10

Tried to raise the question with Yamaha Oz, but you have to be based in Oz... so Can any of you peeps in Oz drop them an E-mail and let us kow the outcome ...... Thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • warlock50

Posted January 06, 2007 - 01:56 AM

#11

I can tell you that those rego plate holders that come out factory with our in Oz WRs will most likely be taken off by 90% of people that buy them and opt for a aluminium rego plate holder which mind you arnt that easy to get hold of atm being such a new bike. I am one of those people that are waiting for the lighter alum plate holder.
If your keen for one of those plastic ones that come out factory that have the indicators why not post a thread on these sites in Oz they maybe able to sell you one they dont want.

www.dirtbikeworld.net
www.dirtblokes.com.au

Register with them too its free:thumbsup:

  • RSWR450F

Posted January 06, 2007 - 07:26 AM

#12

Reg. plate ACERBIS with LED light:

http://www.rsracing....slides/c13.html


Rosta WR
www.rsracing.cz

  • dangermouse007

Posted January 06, 2007 - 08:22 AM

#13

Did not think you had 07's in Oz yet ??... but I would still like to have the part number of the Yammy hanger,..

  • tp3dxf

Posted January 06, 2007 - 06:26 PM

#14

contact one of the aussie members and get them to post it over to you.

Here what I did using a bit of old heater hose from a car....
Posted Image


Dude I love your solution. I have already broke two aluminum plate brackets. The heater hose will bend when I drop the bike. I am going to have to make up something similar. Great Idea.

  • WR_Dave

Posted January 07, 2007 - 07:15 AM

#15

I saw this at langstonracing.com http://www.langstonr..._Enduro_Fen.htm WR Dave.

  • Bent6

Posted January 07, 2007 - 03:53 PM

#16

I saw this at langstonracing.com http://www.langstonr..._Enduro_Fen.htm WR Dave.


Great link. Lots of good stuff there.

  • gregwr450f

Posted January 07, 2007 - 04:00 PM

#17

Did not think you had 07's in Oz yet ??... but I would still like to have the part number of the Yammy hanger,..


I'll get the part number for you today (if available), be aware that most of us take them off because they are bulky and will break off when stacking anyway...........they are fine for road riding though.

  • gregwr450f

Posted January 07, 2007 - 04:09 PM

#18

Dude I love your solution. I have already broke two aluminum plate brackets. The heater hose will bend when I drop the bike. I am going to have to make up something similar. Great Idea.


I got the idea off one of my mates, he has had no problems with for over 2 years.

  • gregwr450f

Posted January 07, 2007 - 08:32 PM

#19

Items are as follows.....
Rego plate holder 5um-f1685-20-ad.............$83au
Rego plate holder subframe (u shape bar) 5um-f1671-00-ad..............$92au
Renforcement plate (flate plate on top of guard) 5um-f166-00-ad...........$13au

all of the above comply with the Austrailian design regulations/rules

  • dangermouse007

Posted January 07, 2007 - 11:25 PM

#20

Many Thanks... Its only for Road riding, all off for racing... thanks again




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.