96 XR600 has missing/popping problem

2 replies to this topic
  • mmbass1971

Posted January 04, 2007 - 01:24 PM


Help Needed!

The bike runs fine until it heats up and then the problems begin. After heating up the bike will still idle with the occasional miss (once a minute) but doesn't stop the bike. When riding the bike it accelerates fine if using 75% to full throttle but using 20%-70% throttle the bike starts missing a popping both on acceleration and when crusing. This just started happening this last week. We went ridding for 5 days and days 1-3 it ran great then I woke up to ride the 4th day and this started happening. I took out the carb and completely cleaned it jets and all. Also, it seems to be making a slightly more valve noise (clicking) than normal. Thanks in advance.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cbaranski

Posted January 04, 2007 - 02:14 PM


Check the valve adjustment and clean the air filter if you havent already. Try this and see.

  • rmhrc630

Posted January 04, 2007 - 03:53 PM


Stator also

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.