2006 WR450 Graphics

4 replies to this topic
  • Chuck_Nelson

Posted December 31, 2006 - 04:43 PM


My wife bought me a new graphics kit for my 2006 WR450 for Christmas. I told her to order a kit that would fit a 2005 because I thought I read somewhere that the plastic didn't change from 2005 to 2006 on the WR. Well, I pulled the tank and shrouds today to put the new graphics kit on and it just doesn't line up with my plastic. The graphics kit is a EVO4 made by Factory Effex for the 2003-2005 WR250F/450F. If it was off a little I could stretch the graphic, but this is off big time, just on the shrouds and not the tank. It is off at the lower rear mounting hole especially and seems to be too tall as well.

Did I just get a bad graphics kit or was there a plastic kit change in 2006?

Thanks for your help!!!

  • tony1970

Posted December 31, 2006 - 06:39 PM


If it fits a '03-'04 it will not fit an '05-'06. The plastic is completly different for those years. '05 and '06 shrouds are the same as the steel framed YZ's.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MountainMax

Posted December 31, 2006 - 09:19 PM


they had a misprint, I have seen lots like this, send it back for 05/06 years.

  • Bleeds_Blue

Posted December 31, 2006 - 09:52 PM


If you're still looking, go here...



  • MountainMax

Posted January 01, 2007 - 10:26 AM


and there is always eba...........


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.