cutting out at initial throttle

No replies to this topic
  • hellraiser

Posted December 31, 2001 - 04:09 PM


I am an owner of a 98 wr400.I am having a problem with the bike falling on its face when I wack the throttle to take off or coming out of a corner.This is very annoying because the bike hits when Im not prepared for it,and has almost caused me a few times over the bars.The motor was recently rebuilt(the bike did it before the rebuild)and while it was apart the carb was torn down and cleaned(what a nightmare).I was told by a friend to try advancing the accelerator pump,this helped his yzf400,but it did nothing for my bike.I was wondering if anyone else has had this problem,or if maybe someone had some ideas to help me out.The bike has a FMF powercore 4 pipe on it,just the silencer not the header.Any info would be greatly appreciated. :)


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.