Little help please...

5 replies to this topic
  • minkkinen

Posted December 02, 2006 - 02:36 PM


Just got that fuel screw, but where it goes???????? ( stupid or what )

  • MountainMax

Posted December 02, 2006 - 02:46 PM


take off the float bowl, punch out the stop, and on the inside of the carb you'll see the stock fuel screw there, remove it, and put on float bowl, then the new one, make sure oring, spring, and washer are all oriented proper.

  • minkkinen

Posted December 02, 2006 - 06:50 PM


Thank you Mountain Max...
...kind of hided behind that little "cover washer".
Happy hollidays!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • meusoc45

Posted December 03, 2006 - 02:06 AM





Here you go!!!

  • MountainMax

Posted December 03, 2006 - 10:02 AM


WoW meusoc45, nice pics, and very clean bike, jeesh, must be brand new.

  • ISBB

Posted December 03, 2006 - 05:41 PM


if you have a dental pick you dont need to pull the bowl off.. just take the dental pick and pick it out then while you have the carb twisted on the boots just take your screwdriver and and turn the OLD SCREW all the way in COUNTING the turns... remember that number... then unscrew the fuel screw and make sure you get the spring washer and o-ring assemble them onto the new fuel screw and slide back in there screw it all the way in and then back it out the number of turns (that number i told you to remember earlier) then start the bike and fine tune. :worthy:


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.