jd jet kit and ais removal


4 replies to this topic
  • arizonachef

Posted November 30, 2006 - 08:52 AM

#1

I am removing thr ais on my o7 wr my question is in the past on previous models should i bother with the needle and jet in the ais kit or just use parts from the jd jet kit. What have you guys done in the past.

  • clark4131

Posted November 30, 2006 - 09:25 AM

#2

If you have both, then use the JD Jetting needles. If not, hold off on buying the JD kit and see what happens with GYTR needles...SC

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • arizonachef

Posted November 30, 2006 - 10:08 AM

#3

hey thanks for the info i will do it and let you know

  • Ramcc4x4

Posted November 30, 2006 - 12:19 PM

#4

My Wr450 ran much better with the JD blue needle than the GYTR needle.

  • Seabass

Posted November 30, 2006 - 08:19 PM

#5

What I wanna know is.........does the subframe/ shock have to be removed to get a clear shot at the carb on the '07?




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.