Nx 650 Front Wheel For The L


1 reply to this topic
  • frankiewhipit

Posted November 22, 2006 - 04:31 PM

#1

Has Anyone Tried To Swap The Front Wheel From An Nx650 Onto A Xr650l? As Best As I Can Tell The Inner Bearing Bore Is Smaller (15mm), Other Than That, I'm Thinking It'll Work.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • frankiewhipit

Posted November 30, 2006 - 04:06 PM

#2

OK IF ANYONE IS INTERESTED, IT DOES WORK, YOU HAVE TO CHANGE THE BEARINGS TO THE XRL BEARINGS WHICH ARE 1 MM THINNER, MACHINE A SPACER FOR THE ROTOR SIDE, 20MM WIDE INSTEAD OF 19MM & PUT A 1 MM WASHER ON THE SPEEDO DRIVE SIDE:thumbsup:





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.