05 Wheels on an 06?


3 replies to this topic
  • Climber

Posted November 18, 2006 - 06:37 AM

#1

Will the 05 wheels (hubs) swap right over to an 06 without any mods/shims?

I got to wondering after the thread on th 04 trees stated that the fork spacing was 2mm narrower.


Got good torque wrenches, dial indicators, Starret micrometer set,evne a truing stand for pre- 1970 Harley big twin fly-wheels,... but can't find my stinkin ruler... time to clean the garage or head to the hardware store...:cheers: :p :bonk:

Thanks

  • ethan

Posted November 18, 2006 - 06:58 AM

#2

Yes they will. The spacer are a different shape to help put the wheel on, but the hub is the exact same.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted November 18, 2006 - 09:06 AM

#3

Will the 05 wheels (hubs) swap right over to an 06 without any mods/shims?

I got to wondering after the thread on th 04 trees stated that the fork spacing was 2mm narrower.

You need to read it a little more thoroughly:

... The fork tubes are set 2mm farther apart. They made it possible to use the same wheel/axle/spacers by setting each axle lug inward 1mm to compensate for it.



  • Climber

Posted November 18, 2006 - 12:16 PM

#4

You need to read it a little more thoroughly:


Thanks

I measured every thing up and found out the right way.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.